101 software networking exam 2024 with correct questions and answers, Exams of Software Engineering

Download 101 software networking exam 2024 with correct questions and answers and more Exams Software Engineering in PDF only on Docsity! 101 software networking exam 2024 with correct questions and answers 1. Class B network range - Correct answer 128 - 191 2. A known issue has been identified in the BIG-IP system. A software fix is available to the public. What is this software fix called? - Correct answer Hotfix (maybe) 3. TMSH command to create a management route - Correct answer create /sys management-route default gateway 129.168.1.254 4. Which network protocol should be used for translating network layer addresses into link layer addresses? 5. ICMP 6. ARP 7. DHCP 8. MAC - Correct answer ARP 9. Four computers are distributed in two separate VLANs connected to a single layer 2 switch. 10.Which traffic is sent to the router for processing? 11.no traffic because computers are on the same switch 12.only traffic between computers on separate VLANs 13.only traffic between computers on the same VLAN 14.all traffic between all computers - Correct answer no answer 15.Administrator needs to separate one broadcast domain into four. 16.Which device will accomplish this task in an economical way? 17. firewall 18.ADC 19.switch 20.hub - Correct answer switch 21.What HTTP Response code error occurs when a web server is currently unable to handle any requests due to a temporary overloading and maintenance? 22.503 Service Unavailable 23.600 Busy Everywhere 24.403 Forbidden 25.304 Not Modified - Correct answer 503 Service Unavailable 26.A BIG-IP Administrator needs to identify the CVE vulnerabilities from a BIG-IP using the iHealth Diagnostic Tool. Which utility should the administrator use to automatically collect configuration and diagnostic information from the BIG-IP? 27.system_check 28.platform_check 29.ucs 30.qkview - Correct answer qkview (maybe) 31.A BIG-IP Administrator has five VLANs that must be assigned to a single interface. 32.What is the minimum number of VLANs that need to be set as 'tagged'? 33.1 34.0 35.4 36.5 - Correct answer 1 (maybe) 37.A Network Administrator wants to check the number of TTL iterations and transmissions of a web server on an IPv6 network.Which IPv6 header field is equivalent to IPv4's Time To Live field? 38.Payload Length 81.After a successful software upgrade to the members of a pool in the BIG-IP appliance, users are unable to access their web portals and receive the following error message: "This page can't be displayed." 82.Pool members have black diamond status icons. 83.What is causing this issue? 84.The pool is down. 85.The pool is inactive. 86.The pool is forced offline. 87.The pool is disabled. - Correct answer The pool is disabled. 88.Which tool should a BIG-IP device use to log actions performed by administrative users on an external server? 89.Syslog 90.Netflow 91.Reliable Event Logging Protocol (RELP) 92.Simple Network Management Protocol (SNMP) - Correct answer syslog (maybe) 93.A BIG-IP Administrator is unable to reach a server in the same subnet network. The server and administrator's workstation is connected in the same switch, and ports are up. The workstation is configured with 10.10.1.2/25, and the server is configured with 10.10.1.120/25. 94.Which command should the administrator execute to verify layer two mapping? 95.netstat 96.ping 10.10.1.2 97.nslookup 10.10.1.2 98.arp -a - Correct answer arp -a (maybe) 99.A BIG-IP Administrator needs to identify how much traffic is arriving at each interface and monitor the number of packets dropped by the BIG-IP device interface. 100. Which command should the BIG-IP Administrator use? 101. tmsh list /sys interface all-properties 102. tmsh show /sys interface all-properties 103. tmsh show /net interface all-properties 104. tmsh list /net interface all-properties - Correct answer tmsh show /net interface all-properties 105. A company has an Active-Standby HA set up for BIG-IP. A failover event occurs. Upstream and downstream switches were not able to handle Gratuitous ARP announcements for all the Self-IPs and Virtual IPs of the Active device. 106. Which BIG-IP solution can minimize dropped packet during failover events? 107. MAC masquerade 108. Changing to an Active-Active Setup 109. Upgrading the firmware 110. MAC address modification - Correct answer MAC masquerade 111. What is the purpose of a server pool when configuring a BIG-IP device? 112. to provide a pool used to configure translation prefixes and parameters 113. to provide a set of translation addresses to use when changing the source address 114. to provide a logical set of devices that can receive and process traffic 115. to provide a logical set of intrusion detection systems that can monitor traffic - Correct answer to provide a logical set of devices that can receive and process traffic 116. A BIG-IP Administrator verifies the Service Check date and finds that it has passed. 117. What must be done prior to upgrading the BIG-IP device? 118. Force load mcpd. 119. Modify the license file date to match the current date. 120. Re-activate the current license. 121. Open an F5 Support case to have a new license key issued. - Correct answer Re-activate the current license. 122. In a deployment, the server response is saved locally on a load balancer and delivered multiple times without querying the backend servers each time. 123. What is this behavior called? 124. Replication 125. Deduplication 126. Replaying 127. Caching - Correct answer Caching 128. Which feature is needed for a one-armed topology to work properly? 129. destination address translation 130. physical address translation 131. source address translation 132. port translation - Correct answer source address translation 133. At which OSI layer is this occurring? 134. Session 135. Network 136. Data link 137. Presentation - Correct answer Presentation 138. Which ICMP message will the router send if a datagram's time to live has expired? 139. Echo request 140. Time exceeded