Download Manufacturing Technology Exam for Mechanical Engineering Students - Summer 2008 and more Exams Manufacturing Technologies in PDF only on Docsity! Cork Institute of Technology Bachelor of Engineering in Mechanical Engineering – Stage 2 (EMECH_7_Y2) Summer 2008 MANUFACTURING TECHNOLOGY - (Production Technology & Welding) (Time: 3 Hours) Answer Five questions. Three from Section A Examiner: Mr. R. Kennedy and TWO from Section B Mr. J. Burns All questions carry equal marks Dr. P. Delassus User separate answer books for Sections A and B. Mr A. Bateman Section A Q1. (a) While setting up the CNC lathe, describe the following using block diagrams: (i) How to approach the reference points (ii) How to call up a programme already installed in the memory of the machine. (4 Marks) (b) Assuming you already have a programme installed in the memory of the CNC lathe list the sequence of checks you would make to ensure the safe automatic machining of the work. (6 Marks) (c) Describe the procedure you would adopt to identify any station number on the turret of a CNC lathe. (2 Marks) (d) Assuming you are installing a carbide-tipped cutter into one of the stations on the CNC lathe. List in detail the sequence of operations in order to establish tool data and input it into the memory of the machine. (8 Marks) Q2. (a) In order to maintain accuracy, the surface grinding machine must be extremely rigid. Explain how this is achieved. (4 Marks) (b) Precision grinding machines fall into four categories. What are they? (4 Marks) (c) In order to produce cylindrical and flat work surfaces, three alignments are necessary. Please list them. (6 Marks) (d) With the aid of a neat sectional diagram, describe the operation of a permanent magnetic chuck and state where it might be used. (6 Marks) Q3. (a) State some of the factors which affect machining. (4 Marks) (b) With the aid of labelled diagrams, differentiate between peripheral and face grinding. (3 Marks) (c) Suggest three important reasons for using a grinding process in the machine-shop. (3 Marks) (d) Write a note on jigs and fixtures and indicate in detail what they are used for. Use a neat labelled diagram to describe a jig. (10 Marks) Q4. (a) Calculate the in feed on a top slide when cutting a thread of 2.5mm pitch I.S.O. form using the half angle method. (3 Marks) (b) Calculate the tailstock offset to turn a taper of 2.5 in 550 on a mandrel 200mm long. (3 Marks) (c) List the advantages of using a taper turning attachment over offsetting the tailstock of the lathe. (4 Marks) (d) With the aid of a neat detailed diagram describe the taper turning attachment. (10 marks)
