CDT Exam Prep Questions with 100% Correct Answers | Latest Version 2024 | Expert Verified, Exams of Advanced Education

Download CDT Exam Prep Questions with 100% Correct Answers | Latest Version 2024 | Expert Verified and more Exams Advanced Education in PDF only on Docsity! CDT Exam Prep Questions with 100% Correct Answers | Latest Version 2024 | Expert Verified Which of these documents, might we find in the Project Manual but they are not contract documents? A. The Agreement B. Procurement Requirements C. Addendum D. Supplemental Conditions - Correct Answer-B Before a model building code can become the building code for a jurisdiction, it has to be adopted by? A. Authority Having Jurisdiction B. State Government C. Building Inspector D. International Organization for Standardization - Correct Answer-A The Construction Manager is hired by this entity? A. General Contractor B. Owner C. A/E D. Contract Administrator - Correct Answer-B The parties to the Construction Agreement are? A. General Contractor, Subcontractor, and Construction Manager B. A/E, General Contractor, and Contract Administrator C. Building Official and General Contractor D. Owner, Contractor, and A/E - Correct Answer-D The organization responsible for the General Conditions known as 201 are? A. DBIA B. AGC C. AIA D. CSI - Correct Answer-C When there is a dispute between the specifications and the drawings, what is the proper way to settle the dispute? A. The drawings have priority A. Drawings B. Construction Agreement C. Conditions of the Contract D. Procurement Documents - Correct Answer-C Defined as the written and graphic documents prepared or assembled by the A/E for communicating the project design for construction and administering the construction contract: A. Construction Documents B. Plans C. Procurement Documents D. Conditions of the Contract - Correct Answer-A Typically, Procurement Requirements should not include which of the following documents? A. Instructions for Procurement B. Available Information, including Resource Drawings C. Procurement Forms and Supplements D. Performance Bonds - Correct Answer-D The Invitation to Bid is designed to attract: A. Architects B. Designers C. Qualified Bidders D. Subcontractors - Correct Answer-C The volume containing the specifications, Conditions of the Contract, Information to Bidders, Instructions to Bidders, and the bid form is called: A. Spec book. B. Preliminary Project Descriptions. C. Project Manual. D. Submittals. E. None of the above. F. All of the above. - Correct Answer-C The documents developed to attract and assist qualified bidders in properly submitting bids are called? A. Contract Documents B. Procurement Requirements C. Conditions of the Contract D. Bidders Agreement - Correct Answer-B Signed by each party the Agreement can be best explained as: A. Defines the relationship of the Owner, A/E, and Contractor B. Is the one instrument of the contract documents that binds the signing parties to the work C. Constitutes the legal portion of the specifications D. Binds the Architect to the General Contractor - Correct Answer-B An Alternate: A. Is the same as an option in the specifications. B. Is used for the same purpose as unit prices. C. Should be described in Division 01 and specified in the appropriate specification sections. D. Should be described in detail on the bid form. - Correct Answer-C Contract Documents consist of: A. Agreement between Owner and Contractor, Conditions of the Contract, Drawings, and Specifications, Addenda and Modifications, other Documents listed in the Agreement. C. The agreement, general and supplementary conditions, and specification only. D. The agreement, general conditions, specifications, and drawings. - Correct Answer-B Division 01 sections should coordinate with: A. Procurement requirements and the agreement B. General and supplementary conditions C. Specifications and Drawings D. All of the above - Correct Answer-D Administrative and procedural requirements are specified in: A. General Conditions. B. Supplementary Conditions. C. Division 01 General Requirements. D. Bidding requirements. E. Instructions to Bidders. - Correct Answer-C The agreement form, before modification, should be reviewed carefully by the: A. Owner's legal counsel. B. Owner. C. Architect and Owner. D. Contractor. - Correct Answer-A If a contractor recognizes or has knowledge of errors, inconsistencies, or omissions in the contract documents, the contractor is responsible for reporting those errors, omissions, or inconsistencies to: A. Owner. B. Authority Having Jurisdiction (AHJ). C. A/E. D. His/her Surety Company. - Correct Answer-C Shop drawings, product data, and samples are: A. Considered part of the contract documents. B. Not contract documents. C. Prepared by the Architect. D. Prepared during construction document stage. - Correct Answer-B During the construction stage of a project, several types of supplemental drawings are prepared, such as shop drawings. Shop drawings may be prepared by: A. The contractor. B. The subcontractor. C. The material/equipment supplier. D. All of the above. - Correct Answer-D Preconstruction activities begin when the contractor has received: A. All his subcontracts. B. An executed agreement. C. A copy of the contract documents. D. A purchase order. - Correct Answer-B Which of the following is not normally found in an Agreement: A. Contract time. B. Contract sum. C. Reference to contract documents. D. Construction Submittal requirements. - Correct Answer-D B. Design-Negotiate-Build. C. Design-Bid-Build. D. Construction Management. - Correct Answer-D During the construction stage, the Contractor shall maintain record documents: A. In the Architect's office. B. In the field office. C. In the Owner's office. D. With each of the subcontractors. - Correct Answer-B Inspections required by authorities having jurisdiction shall be obtained by the: A. Owner. B. Contractor. C. Authority requiring the test. D. Subcontractor, when it is the Subcontractor's work being tested. - Correct Answer-B Who is required to have a program for project site safety? A. Owner. B. A/E. C. Contractor. D. Each Subcontractor. - Correct Answer-C Who is required to protect stored materials? A. A/E. B. Suppliers. C. Contractor. D. Owner. - Correct Answer-C The A/E will: A. Report defects and deficiencies observed in the Work to the owner. B. Be responsible for safety precautions and programs in connection with the Work. C. Be responsible for the Contractor's failure to carry out the Work in accordance with the Contract Documents. D. Maintain record documents during the construction stage. - Correct Answer-A The Contractor shall not contract or be required to contract with any Subcontractor against whom reasonable objection has been made by: A. Owner. B. A/E. C. Contractor D. All of the above. - Correct Answer-D The A/E's approval of Shop Drawings is: A. For conformance with the design concept and design intent indicated in the Contract Documents. B. To make certain the products actually supplied by the Contractor fit in the construction. C. To determine accuracy and completeness of dimensions and quantities. D. To ensure that contract document requirements have been met. - Correct Answer-A The owner must sign: A. Supplemental instructions. B. Change orders. C. Addenda. E. Before fabrication. - Correct Answer-A Quality assurance activities occur: A. Before the work or service is done. B. Before or while accomplishing the work or service. C. During construction. D. During design. - Correct Answer-B Marked up or corrected contract drawings that indicate changes incorporated into the work during construction are called: A. As built drawings. B. Record drawings. C. Shop drawings. D. Contractor certified drawings. E. Addendum drawings. - Correct Answer-B A particular material may be indicated several times on the drawings but is specified in how many locations: A. One. B. Two. C. According to the number of trades involved. D. As determined by Division 01. - Correct Answer-A Resource drawings serve what purpose: A. Show existing work that is to be modified. B. Show construction related to the work, but which is not indicated in the contract. C. Provide the Owner with a set of documents that will facilitate operation. - Correct Answer-B An Allowance is included in the base bid for: A. Cost of an item to be selected. B. Time to extend the work. C. Includes both time and costs of an item. - Correct Answer-C A Unit Price is: A. A cost determined by the A/E. B. Amount determined by number of units multiplied by a unit cost in the Agreement. C. A cost listed on the Bid Form. - Correct Answer-B A defined portion of the work that is priced separately is: A. A Unit Cost. B. Lump Sum. C. Alternate. - Correct Answer-C Section drawings are cut vertically through and perpendicular to project materials to: A. Show watertight construction. B. Show detailed arrangement. C. Show which surfaces are to be finished. - Correct Answer-B Substitutions should not be considered when: A. Requested by RFI. B. Request is indicated on submittals. C. Request does not include an itemized comparison. D. AII of the above. E. None of the above. - Correct Answer-D If the contractor installs an item of work in accordance with the contract documents, knowing it is in violation of the Which of the following is not an example of a contingency cost? A. Construction delays. B. Contractor's overhead. C. Weather, labor and material shortages. D. Regulatory restrictions. - Correct Answer-B What are the four C's for effective communication? - Correct Answer-Clear Concise Correct Complete What three factors affect the quality of a project? - Correct Answer-Time/Schedule Extent/Scope Cost/Budget A key factor affecting project delivery A. Complexity. B. Time. C. Cost. D. Quality. - Correct Answer-B The four considerations during facility programming that should be identified in which of the following: A. Time, goals, cost, and function. B. Function, time, economy, and planning. C. Pre-design, goals, form, and cost. D. Function, form, economy, and time. - Correct Answer-D Which of the following is not a method of specifying? A. Procedural. B. Proprietary. C. Descriptive. D. Reference standard. E. Performance. - Correct Answer-A Minor changes involve adjustments to: A. The contract sum or time. B. No adjustment to the contract. C. Adjustment to the contract time only. - Correct Answer-B Which of the following is not an estimating technique during the design stage? A. Unit price. B. Unit of measure. C. Order of magnitude. D. Proprietary. E. Assemblies/systems. - Correct Answer-D The total project commissioning process includes validation of the project delivery process during the following stages: A. Concept, programming, design, contract document preparation. B. Concept, ground breaking, design, contract documents. C. Bidding, preconstruction, document review, contract documents. D. Bidding, preconstruction, schematic design, site surveying. - Correct Answer-A