Competency Modeling and Job Analysis: Definitions, Trends, and Debates, Lecture notes of Psychology

Download Competency Modeling and Job Analysis: Definitions, Trends, and Debates and more Lecture notes Psychology in PDF only on Docsity! Competency Modeling & Job Analysis 1 Competency Modeling & Job Analysis Current trends and debates in the academic literature The current report details the state of the academic literature on competency modeling and job analysis. The paper begins by providing definitions of competencies, competency modeling, and job analysis. The next section summarizes current trends in the literature on competency modeling and job analysis. The final section uncovers some current debates in the competency modeling and job analysis literatures. Definitions Competencies: Although the definition appears to vary widely (Schippmann, et al., 2000), competencies are typically defined as a combination of knowledge, skills, abilities and other individual characteristics (often called KSAOs; including but not limited to motives, personality traits, self-concepts, attitudes, beliefs, values, and interests) that can be reliably measured and that can be shown to differentiate performance (Mirabile, 1997; Schippmann, et al., 2000; Spencer, McClelland, & Spencer, 1994). Competency modeling: Competency modeling is typically defined as the identification, definition, and measurement of the KSAOs that are needed to perform successfully on the job (Bartram, 2004; Schippmann, et al., 2000). Competency modeling can be carried out using a few different approaches, but the most common are the individual job level and the organization level (Mansfield, 1996). The former deals with identifying the characteristics (i.e., KSAOs) that are necessary to be successful in a particular job (often referred to as a bottom-up competency model, and is quite similar to job analysis), whereas the latter takes into account organizational objectives, vision, and strategy and attempts to develop a set of competencies that are applied to the entire organization, a department within the organization, or a job family within the organization (Lawler, 1994; Prahalad & Hamel, 1990). Job analysis: Broadly defined, job analysis involves collecting data about observable job behaviors, and delineating the knowledge, skills, abilities, and other characteristics needed to perform the job (Cascio & Aguinis, 2005; Harvey, 1991). This broad definition is typically broken into two separate approaches to job analysis: worker-oriented job analysis and task- oriented job analysis. Worker-oriented job analysis is often referred to as job specification and deals with the necessary KSAOs for successful completion of the job. As one can see, this is very similar in nature to the definition of competency modeling advanced above. The other approach is referred to as task-oriented job analysis (also called work-oriented), and deals with what gets done on the job (i.e., the job relevant behaviors) and how the job is conducted (including the tools, machinery, information, and people with which the incumbent typically interacts). This approach is often referred to as a job description, as it details the necessary behaviors for successful completion of the job (Cascio & Aguinis, 2005). Competency Modeling & Job Analysis 2 Recent trends in competency modeling and job analysis Automation of competency modeling/job analysis The use of technology is changing the nature and execution of many areas of human resource practice (e.g., online assessments; Bartram, 2004). In an effort to streamline and make the process of competency modeling/job-analysis more efficient, Mason and Lin (2008) advocate the use of online data warehouses of competency models, web-based focus groups, and the use of online surveys to gather data from subject matter experts (SMEs) and incumbents. Others have utilized an online database of job information called the Occupational Information Network (O*NET) for the purpose of gathering position requirements and determining common tasks (e.g., McEntire, Dailey, Osburn, & Mumford, 2006; Reiter-Palmon, Brown, Sandall, Buboltz, & Nimps, 2006). The implementation of these methods may have drawbacks, including the inability to detect and account for cultural differences, the lack of access to technology in certain areas of the world, and the inability to apply the pre-made models to specific jobs. Mason and Lin make some important recommendations for other practitioners who choose to implement job analysis or competency modeling using technology, including a great deal of planning in advance and ensuring that key stakeholders get involved. As Harvey (2008) points out, the automation of job analysis and competency modeling has tremendous potential to make the process more affordable and practical, but warns of the problems (e.g., inaccuracy) associated with applying an average profile to a specific job. Strategic job analysis Strategic job analysis involves attempting to identify the relevant tasks, behaviors, and KSAOs for a job as they are predicted to be in the future (Schneider & Konz, 1989). This approach represents a change from descriptive job analysis (with a focus on describing the job as it currently exists) to predictive job analysis (which focuses on how the job is expected to be in the future). The need for strategic job analysis is becoming more apparent because of the dynamic nature of modern-day organizations (with a greater reliance on rapidly changing project teams) and as organizations try to hire, train, and appraise the performance of new positions (Sackett & Laczo, 2003; Sanchez & Levine, 2001). Despite the increased call for strategic job analysis, very little research has been conducted on the topic, with most of the available literature on the topic being prescriptive in nature (with the exception of Arvey, Salas, & Gialluca, 1992; Bruskiewicz & Bosshardt, 1996) and focusing largely on how to carry out a strategic job analysis (e.g., see Schneider & Konz, 1989). The major findings from these few empirical studies suggest that strategic job analysis may be able to successful identify future skill requirements. However, many questions remain, such as, how well can strategic job analyses predict successful performance? Cognitive task analysis With the advent of the Internet and the great increase in technology across the workplace, today’s jobs contain more cognitive complexity than ever before (Bartram, 2004). In an effort to best select and appraise the performance of today’s workers, cognitive task analysis (CTA), that is, the identification and analysis of cognitive processes that underlie task performance, has been offered as a supplement to traditional task analysis (Chipman, Schraagen, & Shalin, 2000; Sackett & Laczo, 2003). The effectiveness of CTA at modeling the cognitive processes of jobs has recently been demonstrated in a large-scale meta- Competency Modeling & Job Analysis 5 To what extent are competencies different from the traditional knowledge, skills, abilities and other individual characteristics (KSAOs) that are typically identified through job analysis? - Competencies identified at the individual job level are often very similar in nature to the KSAOs identified during a worker-oriented job analysis. - However, competencies identified at the organization level (“core competencies”) are more akin to organizational culture, mission, and goals than to KSAOs identified through job analysis. Does a competency model developed in one organization work for another organization? - Yes, competency profiles are useful for the same position across organizations (Mason & Lin, 2008). - No, competencies should be carefully constructed for each individual position; otherwise they have the potential to be inaccurate (Harvey, 2008). Conclusions The voluminous writing on competency modeling and job analysis is enough to leave one feeling unsure about which approach is best amid the debates. Well, the question of a singular overall best approach is perhaps not the right way to approach the issue. Instead, the approach that is chosen should depend on the conditions of the environment/job, the needs of the organization, and the ultimate uses of the competency model/job analysis (see Table 1 below). For example, if an organization is interested in developing a leadership training component for a succession planning program, then the best approach would likely be a top-down competency model, because the mission and goals of the organization will be important. However, if the organization is interested in developing a selection instrument for a new job in their IT department, then perhaps a strategic job analysis would be most appropriate because of the legal implications of a selection context and the forward looking aspect of the strategic job analysis. One could also employ a methodologically sound bottom-up competency model to this situation, ensuring to keep a focus on what competencies will be important for success in the future. Table 1. Sample of different uses of job analysis/competency modeling depending on needs. Job analysis Competency modeling Situation Personal ity Strategi c Cognitiv e task Work- oriented Top- down Bottom- up Leadership training for succession planning X Selection instrument for a new IT job X X In addition, an organization can decide on the level of specificity that is desired and the organizational level at which the competency modeling/job analysis effort will be focused (see Table 2). For example, if an organization was interested in examining an individual job at a particular moment in time, they may consider conducting a job analysis. However, if Competency Modeling & Job Analysis 6 they were interested in applying this to multiple jobs, they may want to examine job competencies. Additionally, if an organization wanted to examine several job levels or their entire organization and make it specific to their organization, they should consider examining organizational competencies (or organizational strengths (Byham & Moyer, 2005)). If the organization was looking to determine broad competencies that apply across organizations, then perhaps core competencies would be the appropriate type of analysis. Table 2. Level and specificity in job analysis and competency modeling. Specificity Unique to each case Applicable to many cases Individual (job, role, job level) Job analysis Job competencies (multiple job approach)* Le ve l Organization (several job levels, departments, or entire organization Organizational competencies (organizational strengths*) Core competencies *Adapted from Byham & Moyer (2005) As one can see, the question of a singular best approach to job analysis or competency modeling is not a straight-forward one to answer, as it will depend upon several factors. Ultimately, the organization should consider their purpose for conducting the job analysis, their needs, and the environment within which the job takes place. A solid understanding of the fundamentals will help to maximize the fit between the job analysis or competency modeling approach taken and the outcomes of such a process. References Arvey, R. D., Salas, E., & Gialluca, K. A. (1992). Using task inventories to forecast skills and abilities. Human Performance, 5, 171-190. Barrick, M. R., & Mount, M. K. (1991). The Big Five personality dimensions and job performance: A meta-analysis. Personnel Psychology, 44, 1-26. Bartram, D. (2004). Assessment in organizations. Applied Psychology: An International Review, 53, 237-259. Bruskiewicz, K. T., & Bosshardt, M. J. (1996, April). An evaluation of a strategic job analysis. Paper presented at the 11th annual meeting of the Society for Industrial and Organizational Psychology, San Diego, CA. Byham, W. C., & Moyer, R.P. (2005). Using competencies to build a successful organization. A monograph of Development Dimensions International. Retrieved June 20, 2008, from www.ddiworld.com/thoughtleadership/forwardthinking.asp. Cascio, W. F., & Aguinis, H. (2005). Applied psychology in human resource management (6th ed.). Upper Saddle River, NJ: Pearson Prentice Hall. Cellar, D. F., Curtis, J. R., Kohlepp, K., Poczapski, P., & Mohiuddin, S. (1989). The effects of rater training, job analysis format and congruence of training on job evaluation ratings. Journal of Business and Psychology, 3, 387-401. Competency Modeling & Job Analysis 7 Chipman, S. F., Schraagen, J. M., & Shalin, V. L. (2000). Introduction to cognitive task analysis. In J. M. Schraagen, S. F. Chipman, & V. L. Shalin (Eds.), Cognitive task analysis (pp. 3-23). Mahwah, NJ: Erlbaum. Costa, P. T., McCrae, R. R., & Kay, G. G (1995). Persons, places, and personality: Career assessment using the Revised NEO Personality Inventory. Journal of Career Assessment, 3, 123-139. Cucina, J. M., Vasilopoulos, N. L., & Sehgal, K. G. (2005). Personality-based job analysis and the self-serving bias. Journal of Business and Psychology, 20, 275-290. Dierdorff, E. C., & Wilson, M. A. (2003). A meta-analysis of job analysis reliability. Journal of Applied Psychology, 88, 635-646. Green, P. C. (1999). Building robust competencies: Linking human resource systems to organizational strategies. San Francisco: Jossey-Bass. Harvey, R. J. (1991). Job analysis. In M. D. Dunnette & L. Hough (Eds.), Handbook of Industrial and Organizational Psychology (2nd ed.). Palo Alto, CA: Consulting Psychologists Press. Harvey, R. J. (2008, April). Discussant comments. In C. Murphy (Chair), Practical considerations and future directions in job analysis and specification. Symposium conducted at the 22nd annual meeting of the Society for Industrial and Organizational Psychology, San Francisco, CA. Lawler, E. E. (1994). From job-based to competency-based organizations. Journal of Organizational Behavior, 15, 3-15. Lee, R. L. (2004). The impact of cognitive task analysis on performance: A meta-analysis of comparative studies. Dissertation Abstracts International, 65, 7A. (UMI No. 3140506) Lievens, F., & Sanchez, J. I. (2007). Can training improve the quality of inferences made by raters in competency modeling? A quasi-experiment. Journal of Applied Psychology, 92, 812-819. Lievens, F., Sanchez, J. I., & DeCorte, W. (2004). Easing the inferential leap in competency modeling: The effects of task-related information and subject matter expertise. Personnel Psychology, 57, 881-904. Mansfield, R. S. (1996). Building competency models: Approaches for HR professionals. Human Resource Management, 35, 7-18. Mason, C., & Lin, L. (2008, April). The application of a streamlined job analysis to human resource systems: Important considerations, best practices, and lessons learned. Paper presented at the 22nd annual meeting of the Society for Industrial and Organizational Psychology, San Francisco, CA. McEntire, L. E., Dailey, L. R., Osburn, H. K., & Mumford, M. D. (2006). Innovations in job analysis: Development and application of metrics to analyze job data. Human Resource Management, 16, 310-323. Mirabile, R. J. (1997, August). Everything you wanted to know about competency modeling. Training and Development, 73-77. Ones, D. S., Viswesvaran, C., & Schmidt, F. L. (2003). Personality and absenteeism: A meta-analysis of integrity tests. European Journal of Personality, 17, S19-S38. Prahalad, C. K., & Hamel, G. (1990, May-June). The core competence of the corporation. Harvard Business Review, 79-91. Raymark, P. H., Schmit, M. J., & Guion, R. M. (1997). Identifying potentially useful personality constructs for employee selection. Personnel Psychology, 50, 723-736. Reiter-Palmon, R., Brown, M., Sandall, D. L., Buboltz, C., & Nimps, T. (2006). Development of an O*NET web-based job analysis and its implementation in the U.S. Navy: Lessons learned. Human Resource Management Review, 16, 294-309.