Enthalpy Balance - Materials and Heat Balance in Metallurgical Processes - Lecture Notes, Study notes of Materials Physics

Download Enthalpy Balance - Materials and Heat Balance in Metallurgical Processes - Lecture Notes and more Study notes Materials Physics in PDF only on Docsity! blast furnace stoichiomelry–II Preamble In lecture 31 a simplified material balance is considered for ironmaking blast furnace and the results of material balance formulation are presented in the form RIST diagram.. In that it is considered that charge consists of pure iron oxide and coke and the product is hot metal containing carbon only. We have not considered heat balance for that simple case. This lecture considers heat balance in terms of heat input and output. Heat input is required to meet the thermal demand of the process of ironmaking. Heat demand of the blast furnace is met principally by the combustion of coke. In the calculations of coke rate, it is therefore necessary to consider the heat requirements. In the following we will be considering a simplified case in which pure oxide is a source of iron supply and coke is the source of carbon to illustrate the concept. This means that slag formation in this simplified case does not occur. Enthalpy balance in blast furnace Consider a case where input is pure ( in reality iron ore is charged)and carbon (actually coke is used) at . Air is supplied at (in reality air is preheated). Hot metal is considered to be a molten mixture of iron and carbon and exits at . At the moment we exclude slag formation. Top gas leaves at (this is an ideal case to explain the concept). Enthalpy balance Enthalpy into furnace per mole of product =Enthalpy out of furnace per mole of product . (1) ,Where Or (2) Heat demand Heat supply Negative sign in equation 2 indicates that heat is produced. In the equation 2 heat is required to raise the temperature of hot metal from 298K to 1800K. Heat of formation of , CO and CO2 is given below: . Substituting the values in equation 2 we get (3) It is shown in lecture 31 that (4) (5) By equation 3 4 5 and noting (6) The eq. 6 is in terms of kj /kg mole of product iron. Eq. 6 is a simplified approach. It considers heat demand for hot metal only. In reality one has to consider heat demand for slag formation, decomposition of limestone, heat of mixing etc.The heat demand terms can be added simply on the left hand side of the equation 6 Left hand side of eq. 6 is heat demand (D) which is a variable; variable because it may vary from furnace to furnace type of charge etc. Thus equation 6 is Carbon consumption product . Graphical representation Let us rewrite equation 9 as . One can plot as ordinate against . The slope of the line will pass through points Illustration 3 A blast furnace operates with and pig iron Contains . feedconsists of We draw a line with slope 2.55, we determine Top gas composition . gangue. References 1) Rosenquist: Principles of extractive metallurgy 2) Butts: Metallurgical problem 3) Coudrier; l, HupkinsD.W and I-Wilkomirnky : Fundamentals of metallurgical processes. 4) Y.K Rao: Strichiometrical calculation in mettalurgical; processes.