Download Fundamentals of Computer Aided Design: Dimensions in Engineering Drawings and more Study notes Mechanical Engineering in PDF only on Docsity! Dept of Mechanical Engineering and Mechanics, Drexel University Fundamentals of Computer Aided Design Dimensions in Engineering Drawings MEM 201 Dept of Mechanical Engineering and Mechanics, Drexel University Today’s Learning Objectives… • What are dimensions. • Fundamental Rules of Dimensioning. • Guidelines for good dimensioning in engineering drawings. • Dimensioning in AutoCAD. Dept of Mechanical Engineering and Mechanics, Drexel University Units of Measure • decimal inches (preferred), fractional inches, feet and fractional inches • SI or metric – millimeter (mm) • leading zero: metric – yes; inches – no • If units (e.g., IN or mm) are not included with each dimension, specify the units used with a note on the drawing; for example UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS ARE IN INCHES Dept of Mechanical Engineering and Mechanics, Drexel University Dimensioning in General Datum Plane Dimensioning - Continuous Dept of Mechanical Engineering and Mechanics, Drexel University Dimensioning - Cylindrical Dept of Mechanical Engineering and Mechanics, Drexel University Dimensions - Chamfers Or: 45 x 0.25 Dept of Mechanical Engineering and Mechanics, Drexel University Dimensioning – Arcs Dept of Mechanical Engineering and Mechanics, Drexel University Detail Dimensioning in Views Encircle the area of interest Note and leader to identify Enlarge, label, and scale Dept of Mechanical Engineering and Mechanics, Drexel University Fundamental Rules of Dimensioning 9. Place dimensions outside of the views except for large circles. Keep dimensions at least 3/8 inches or 10 mm from the view. 10. Place longer dimensions outside of shorter ones. 11. Place the dimension text between the dimension lines. 12. Use arrow heads at the end of the dimension lines. 13. Inch drawings do not include a preceding zero for dimensions less than one. For example, use .50 to indicate 1/2 inch. Metric dimensions require a preceding zero; e.g., use 0.50 to indicate 1/2 millimeter. Dept of Mechanical Engineering and Mechanics, Drexel University Guidelines for Dimensioning – A Check List 1. All overall dimensions for the object are shown. 2. Dimensions are not duplicated in two views. 3. No dimension is included that is not needed to produce the object. 4. There is no need to calculate, scale, or assume any dimension to define or check features of the object. 5. Dimensions are related to the view that best shows the features being dimensioned. 6. Multiple rows of dimensions are spaced uniformly, with at least 1/4” between rows and 3/8” from views. Dept of Mechanical Engineering and Mechanics, Drexel University Guidelines for Dimensioning 7. Longer dimensions are placed outside shorter ones so that witness lines do not cross dimension lines. 8. All strings of dimensions are lined up. 9. Whenever possible, dimensions are not given to hidden lines. 10. Dimension lines do not cross other dimension lines or witness lines. 12. The radius of all arcs and fillets, and the diameters of all circles have been specified. Dept of Mechanical Engineering and Mechanics, Drexel University Dimensioning in AutoCAD Dept of Mechanical Engineering and Mechanics, Drexel University QUESTIONS ?
