Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

Kirchhoff's Circuit Laws - Circuit Analysis I | EGR 214, Lab Reports of Electrical Circuit Analysis

Material Type: Lab; Class: Circuit Analysis I; Subject: Engineering; University: Grand Valley State University; Term: Spring 2000;

Typology: Lab Reports

2009/2010

Uploaded on 02/24/2010

koofers-user-7el
koofers-user-7el 🇺🇸

10 documents

1 / 2

Toggle sidebar

Related documents


Partial preview of the text

Download Kirchhoff's Circuit Laws - Circuit Analysis I | EGR 214 and more Lab Reports Electrical Circuit Analysis in PDF only on Docsity! Title: Kirchhoff’s Circuit Laws Author: Doug Carlin Lab Partner: Mike Sech Date: January 18, 2000 1.0 Purpose The objective of this experiment is to study the application of Kirchhoff’s Laws to a DC circuit in which the resistive elements are in parallel and series connection. 2.0 Analysis Many DC circuits are made up of arrangements of resistors such that they cannot be broken down into a combination of resistors in series and parallel. These circuits can be analyzed by using Kirchhoff’s Laws. Kirchhoff’s Current law follows directly from the conservation of electric charge and may be stated as    N n I 1 0 for a closed loop. Kirchhoff’s Second Law follows directly from the principles of conservation of energy, and may be stated as: The algebraic sum of the emfs around a loop is equal to the algebraic sum of the potential changes around the loop. In the figure below we can see the relationship in the Kirchoff’s laws. Using the circuit and the resistor values R1=1000, R2=2000, and R3=3000 nominal ohms, the voltage drop across each resistor if the source voltage is vs= 5V The value of vs that will make I1= 5.0 mA is Using the circuit shown an equivalent resistance for R2 and R3. By combining that equivalent resistance with R1 so that there is only one resistor and one voltage supply.
Docsity logo



Copyright Š 2024 Ladybird Srl - Via Leonardo da Vinci 16, 10126, Torino, Italy - VAT 10816460017 - All rights reserved