Massachusetts 1C Forklift Operator License Study Guide 2024-2025, Exams of Nursing

Download Massachusetts 1C Forklift Operator License Study Guide 2024-2025 and more Exams Nursing in PDF only on Docsity! Massachusetts 1C Hoisting License Questions -with 100% verified solutions 2024-2025-tutor verified What equipment falls under a 1C license? Hydraulic telescoping booms without wire ropes and forklifts Definition of a forklift Any mobile powered-propelled truck used to carry, push, lift, pull, stack or tier materials. Types of forklifts Moving mast, fixed mast with telescoping reach, telescoping boom with areal reach. Off-road type of forklift Lull Where should manuals be kept? On the machine at all times Danger signal word indicates Hazardous situation that WILL result in death or serious injury Warning signal word indicates Hazardous situation that COULD result in death or serious injury Caution signal word indicates Hazardous situation COULD result in MINOR or MODERATE injury Notice signal word indicates Addresses practices not related to physical injury. When should equipment be inspected? Prior to each use Equipment can be modified from its original configuration Never Lifting a load over someone is permitted Never Wearing a seat-belt is required Always, if a Roll Over Protective Structure is installed Attachments must be Approved by the manufacturer Free-rigging or suspending a load can only be done With approval from the manufacturer Loads should be carried As low as possible Riders can be allowed Never Double-tiered loads are Difficult to control and should be avoided. Forks should be adjusted to engage loads at maximum width When transporting a load, breaking can cause what? forward tipping When reversing a direction first come to a gradual, complete stop When placing a load make sure the landing point can is level and can support the weight of the load. When approaching the landing the load should be kept in what position As low as possible Do not retract forks from the load until the weight is secure on the landing point Once the load is placed and the forks are free, the boom should be what? Lowered/retracted to the carry position When shutting down the machine, what should be done with the controls cycle them to relieve pressure When parking on an incline wheels should be blocked When working on equipment Attach a "DO NOT OPERATE" tag Hydraulic fluid, under pressure, can do what harm penetrate skin PPE for common maintenance should include Protective eye-ware and hand-ware Before conducting maintenance, hydraulic pressure should be relieved When checking battery, never check terminals by doing what? placing a metal object between them Tire and wheel checks should include Pressure, cuts/punctures, wear, valve stems, rims lug nuts When torquing bolts, what guide should be used Manufacturers specs hand signal to raise a tines? With forearm vertical, forefinger pointing up, move hand in small horizontal circles. hand signal to lower a tines? With arm extended, palm down, lower arm vertically. hand signal to tilt mast back? With forearm vertical, thumb extended, jerk thumb over shoulder. hand signal to tilt mast forward? With arm extended, thumb down, lower arm vertically. Damage that exceeds $5,000 per incident. OSHA safety and health regulations for construction 29 CFR 1926 OSHA occupational safety and health standards 29 CFR 1910 Daily inspection logs are to be maintained per OSHA requirements of all parts subject to wear Clearance required for power lines 10 ft Who may operate a forklift a duly licensed operator or apprentice licensee under the direct supervision of a duly licensed operator. 1C licenses can be revoked for Providing false information, OUI, failure to pay excise taxes, failure to report accidents and injuries, operating an unsafe manner. Construction forklifts Carriage attached to base and can move loads vertically and horizontally Massed forklifts Primarily lift up and down How much weight needs to be behind the front axle in order to lift a 4000 lb load? 4000 lbs The center of gravity is what? the point all wight is distributed equally. What is the stability triangle? imaginary line between the two front tires and the center of the rear axle When picking up an object the center of gravity does what? shifts forward. Factors that affect the stability of an object Terrain, weight distribution, dynamic forces when in motion, wheel base of lift, When going up a hill, which side of the lift should the load be? The uphill side How should a slope be approached? straight on Load charts indicate what the capacity of the forklift based on the angle and extension of the boom. Where should the tank be oriented on a liquid propane powered forklift? The relief valve should be pointing up in the 12 o'clock position Pivot point on a forklift front wheels Jerky movements can be avoided by feathering controls When lifting a load first Tilt load back