Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

NICET Highway Construction Level 1 Certification Test Solutions, Exams of Construction

Solutions to various questions related to nicet highway construction level 1 certification test, covering topics such as water level supervisory switch testing, wire installation in emt, resistor calculations, heat detector placement, and color code requirements. It is a valuable resource for students preparing for the nicet exam.

Typology: Exams

2023/2024

Available from 05/31/2024

carol-njeri
carol-njeri 🇺🇸

4.5

(2)

1.7K documents

1 / 2

Toggle sidebar

Related documents


Partial preview of the text

Download NICET Highway Construction Level 1 Certification Test Solutions and more Exams Construction in PDF only on Docsity! NICET HIGHWAY CONSTRUCTION LEVEL 1 CERT REQUIREMENT TEST SOLUTION rises or falls over 3 inches (NFPA 72, Table 14.4.3.2 17 (j) (4) - Answer When testing a water level supervisory switch serving a pressure tank a signal shall indicate if the water level _____________from the required level the visible appliance (Nfpa 72 18.4.8.1) - Answer If combination audible/visible appliances are installed the location of the installed appliance shall be determined by the requirements of 26 (Nec Annex C tables) - Answer What is the maximum number of 12 gauge THHN wires that can be installed in 1" EMT 150 Ohms - Answer Two resistors are connected in parallel. R1 = 300 Ohms, R2 = 300 Ohms. What is their equivalent resistance? 12 - Answer A Room is 200' long and 150' wide and the 8' high ceiling is smooth and flat. A spot type heat detector has been selected that is
Docsity logo



Copyright © 2024 Ladybird Srl - Via Leonardo da Vinci 16, 10126, Torino, Italy - VAT 10816460017 - All rights reserved