Download Soil Erosion and Wind Erosion Prediction System and more Study notes Environmental Science in PDF only on Docsity! Soil Erosion Soil erosion is the detachment and movement of soil material. The process may be natural or accelerated by human activity. Depending on the local landscape and weather conditions, erosion may be very slow or very rapid. Natural erosion has sculptured landforms on the uplands and built landforms on the lowlands. Its rate and distribution in time controls the age of land surfaces and many of the internal properties of soils on the surfaces. The formation of Channel Scablands in the state of Washington is an example of extremely rapid natural, or geologic, erosion. The broad, nearly level interstream divides on the Coastal Plain of the Southeastern United States are examples of areas with very slow or no natural erosion. Accelerated erosion is largely the consequence of human activity. The primary causes are tillage, grazing, and cutting of timber. The rate of erosion can be increased by activities other than those of humans. Fire that destroys vegetation and triggers erosion has the same effect. The spectacular episodes of erosion, such as the soil blowing on the Great Plains of the Central United States in the 1930s, have not all been due to human habitation. Frequent dust storms were recorded on the Great Plains before the region became a grain-producing area. "Natural" erosion is not easily distinguished from "accelerated" erosion on every soil. A distinction can be made by studying and understanding the sequence of sediments and surfaces on the local landscape, as well as by studying soil properties. Water Erosion Water erosion results from the removal of soil material by flowing water. A part of the process is the detachment of soil material by the impact of raindrops. The soil material is suspended in runoff water and carried away. Four kinds of accelerated water erosion are commonly recognized: sheet, rill, gully, and tunnel (piping). Sheet erosion is the more or less uniform removal of soil from an area without the development of conspicuous water channels. The channels are tiny or tortuous, exceedingly numerous, and unstable; they enlarge and straighten as the volume of runoff increases. Sheet erosion is less apparent, particularly in its early stages, than other types of erosion. It can be serious on soils that have a slope gradient of only 1 or 2 percent; however, it is generally more serious as slope gradient increases. Rill erosion is the removal of soil through the cutting of many small, but conspicuous, channels where runoff concentrates. Rill erosion is intermediate between sheet and gully erosion. The channels are shallow enough that they are easily obliterated by tillage; thus, after an eroded field has been cultivated, determining whether the soil losses resulted from sheet or rill erosion is generally impossible. Gully erosion is the consequence of water that cuts down into the soil along the line of flow. Gullies form in exposed natural drainage-ways, in plow furrows, in animal trails, in vehicle ruts, between rows of crop plants, and below broken man-made terraces. In contrast to rills, they cannot be obliterated by ordinary tillage. Deep gullies cannot be crossed with common types of farm equipment. Deposition of sediment carried by water is likely anywhere that the velocity of running water is reduced—at the mouth of gullies, at the base of slopes, along stream banks, on alluvial plains, in reservoirs, and at the mouth of streams. Rapidly moving water, when slowed, drops stones, then cobbles, pebbles, sand, and finally silt and clay. Sediment transport slope length has been defined as the distance from the highest point on the slope where runoff may start to where the sediment in the runoff would be deposited. Classes of Accelerated Erosion The classes of accelerated erosion that follow apply to both water and wind erosion. They are not applicable to landslip or tunnel erosion. The classes pertain to the proportion of upper horizons that have been removed. These horizons may range widely in thickness; therefore, the absolute amount of erosion is not specified. Class 1. This class consists of soils that have lost some, but on the average less than 25 percent surface. Throughout most of the area, the thickness of the surface layer is within the normal range of variability of the uneroded soil. C - Management factor. Compares cropping practices, residue management, and soil cover to the standard clean fallow plot. C-factors for different management practices are developed based on their observed deviation from the standard, which is clean-till with continuous-fallow conditions. P - Conservation practices implemented into the management system. It is the soil loss with contouring and/or strip cropping, or terracing to that with straight row cropping/planting up-and-down slope (i.e., parallel to the slope). USLE was the first empirical erosion equation that was not tied to a specific region of the United States, thus the title "Universal" Soil Loss Equation. The USLE has been used in more than 100 countries to guide conservation planning, assess soil erosion for conservation policy development, and estimate sediment yield. It has helped to save millions of tons of soil, thus helping to the feed the world's population, and to protect the environment from sediment produced by soil erosion. Wind Erosion 1 Wind Erosion in regions of low rainfall, can be widespread, especially during periods of drought. Unlike water erosion, wind erosion is generally not related to slope gradient. The hazard of wind erosion is increased by removing or reducing the vegetation. When winds are strong, coarser particles are rolled or swept along on or near the soil surface, kicking finer particles into the air. The particles are deposited in places sheltered from the wind. When wind erosion is severe, the sand particles may drift back and forth locally with changes in wind direction while the silt and clay are carried away. Small areas from which the surface layer has blown away may be associated with areas of deposition in such an intricate pattern that the two cannot be identified separately on soil maps. Types of Wind Erosion 1. SUSPENSION: Fine particles less than 0.1 mm in size are moved parallel to the surface and upward into the atmosphere by strong winds. The most spectacular of erosive processes, these particles can be carried high into the atmosphere, returning to earth only when the wind subsides or they are carried downward with precipitation. Suspended particles can travel hundreds of miles. 2. SALTATION: Movement of particles by a series of short bounces along the surface of the ground, and dislodging additional particles with each impact. The bouncing particles ranging in size from 0.1 to 0.5 mm usually remain within 30 cm of the surface. Depending on conditions, this process accounts for 50 to 90% of the total movement of soil by wind. 3. SOIL CREEP: The rolling and sliding of larger soil particles along the ground surface. The movement of these particles is aided by the bouncing impacts of the saltating particles described above. Soil creep can move particles ranging from 0.5 to 1 mm in diameter, and accounts for 5 to 25% of total soil movement by wind. The impact of bouncing soil particles dislodges finer particles into suspension and sets coarser particles into motion as surface creep. Image by UNL WEPS INTRODUCTION: OVERVIEW OF WEPS 1.1 An Overview of the Wind Erosion Prediction System Introduction Soil erosion by wind is a serious problem in the United States and the world. Wind erosion is a threat to agriculture and the earth’s natural resources. It renders soil less productive by removing the most fertile part of the soil, namely, the clays and organic matter. This removal of clays and organic matter also damages soil structure. In addition to the soil, wind erosion can damage plants, primarily by the abrasive action of saltating particles on seedlings and fruits. Eroded soil can also be deposited into waterways where it impacts water quality and emitted into the air where it degrades the air resources. By affecting these resources, wind erosion can also become a health hazard to humans and other animals. The ability to accurately simulate soil loss by wind is essential for, among other things, environmental and conservation planning, natural resource inventories, and reducing air and water pollution from wind blown sources. The Wind Erosion Equation (WEQ) was published in 1965 by Woodruff and Siddoway (1965). For years, WEQ has represented the most comprehensive and widely used model in the world for estimating soil loss by wind from agricultural fields. The functional form of WEQ is: E=f(I,C,K,L,V) where, E is the average soil loss (tons/acre/year), I is the soil erodibility, K is the soil ridge roughness, C is the climatic factor, L is the field length along the prevailing wind erosion direction, and V is the vegetative factor. WEQ is largely empirical in nature and was derived from nearly 20 years of field and laboratory studies by scientists at the USDA-Agricultural Research Service (ARS), Wind Erosion Research Unit (Chepil, 1958, 1959, 1960; Chepil and Woodruff, 1959). Many improvements were made to WEQ over the next 30 years. (Hagen,1991).