MSC-132: Fishing Gear Technology I - Choosing the Right Marine Technician Knife, Study notes of Design

Download MSC-132: Fishing Gear Technology I - Choosing the Right Marine Technician Knife and more Study notes Design in PDF only on Docsity! MSC-132: Fishing Gear Technology I The Knife: A Tool, a Privilege, and a Responsibility The Knife1 A Tool, a Privilege, and a Responsibility A knife is probably the most useful of all the common tools used by a marine technician. The knife was one of the first tools developed by the cave man. They sharpened and ground thin pieces of flint and quartz to make knives for skinning animals and cutting meat. Knives are continuously evolving as new designs, materials, and production techniques provide an increasing array of specialized uses. Obviously, a knife can be dangerous, and one should exercise caution and good judgment in its use. Use of a knife or any tool as a weapon will not be tolerated in this class. Careless and/or aggressive use of a knife will result in expulsion from this class and/or the college. Aggressive displays of any kind with any tool will also result in the immediate involvement of law enforcement. Illegal blades are not permitted on campus; possession of illegal blades on campus will result in legal penalties. Knife Types There are three general types of knives – fixed-blade, folding blade, and multi-tool – suitable for use in this class. Generally speaking, the most common design for a present day professional mariner is the folding, lock- blade knife. Fixed-blade knives, once the standard for all knife uses, have sturdy, rigid blades and are easy to reach when only one hand is free and you need a cutting edge immediately. A good one is well designed and functional – it has a part to hold and a part that cuts – with no springs or hinges to break or gum up. Short of a broken blade, little can fail. If a fixed-blade knife is chosen for general marine use, it should be of the traditional “sheep foot” design with a relatively small (≤4 inch) blade length. However, because of safety concerns, many agencies prefer their technicians not wear large and sometimes illegal daggers on their belts. Exceptions to this would include “dive knives” which are designed with specific uses in mind, and are not usually thought of as a general-purpose knife. Folding blade knives are by far the most common knives in use today. I would strongly recommend a folding knife that has a lock-blade of approximately 2½ to 4 inches long. The folding, lock-blade is safer and more convenient to carry than the fixed-blade knife. There are many finely crafted lock-blade knives on the market, and most offer quality workmanship and materials only recently made available with the development of modern alloys, synthetic materials, and production techniques. Some folding knives are designed with a clip and are intended to be carried clipped inside a pocket; hence the name “pocket knife.” 1 Illustrations for this handout were excerpted from Backpacker Magazine (March 1981) and HiClipart.com (2018). Information from several articles written by Lionel Atwill and Jonathan Blumenfeld was used. 2 However, several folding knife designs do not ride/fit well in the pocket; due to this, many are designed to be carried in a sheath/case on your belt. You should be aware of the two inherent differences between the folding-blade and fixed-blade knives. First, a folding knife pivots on a pin, and at that joint there is a potential weakness as well as safety concern. A locking-blade helps ease the safety concerns. Second, any folding knife is susceptible to fouling in its many crevices with fish guts, dirt, grease, or other debris. This can inhibit smooth hinge action and make cleaning difficult. The third knife type, the multi-tool, such as a Swiss Army knife or a Leatherman knife can be indispensable for a backpacker or as a tackle box tool; however, I do not think they are convenient to use as a general-purpose knife. The opening and closing process can be tedious, many do not have a locking blade, they are difficult to clean, and the pin must carry the “weight” of many “tools.” If this type of knife is chosen – stay away from cheap imitations. Blades: Size, Shape, & Grind (Bevel) Blade design and size is very subjective. Some technicians prefer large blades, while others favor smaller ones. In many states there are laws governing the length of knife blades. Check the laws in your area. As I understand it, in North Carolina you are not allowed to carry a concealed knife with a blade longer than four inches. A two and a half to four inch blade offers greater control in cutting. A four-inch blade is stout enough to cut any of the light or medium duty ropes you may run into yet small enough to work with netting. Any blade smaller than two inches will not prove very useful as a marine technician tool. Choose a blade grind according to intended usage. Most production knives are either flat or hollow-ground. A flat-ground blade has sides which taper in toward the edge evenly along the entire width. This characteristic makes the flat-ground blade very strong and capable of holding a reliable edge for use in working with ropes. A hollow-ground blade has sides which appear concave. This makes the blade more delicate, but can yield a sharper edge. Hollow-ground blades will not hold an edge for as long as flat- ground blades, but they are slightly lighter and offer somewhat less resistance when cutting.