Training Course details for process, Slides of Computer Networks

Download Training Course details for process and more Slides Computer Networks in PDF only on Docsity! To download and build the new HP System Board Configuration Tool, please follow the stepsbelow: Building the HP SystemBoard Replacement & System Diagnostic Tool 1. BIOS_2020.zip 2. HP_TOOLS_2020.zip 3. Ionic.Zip.dll 4. MakeBootableDMI_MP.exe 5. win98boot.zip 6. WINPE_ARM_2020.zip 7. WINPE_X64_2020.zip 1 3 1. Download files 1-7 above and place them in the same Folder on yourcomputer. a) If you download the files from CSDP, you will need to unzip the files “Ionic.Zip.dll and “MakeBootableDMI_MP.exe” to the root <Folder> directory. Make sure to locate the 2 file in the SAME folder with other 5 files, not in subfolders. 2. Place an 16GB but no more than 32GB USB key into any available USBport. a) Delete all the partitions on the flash drive (if any exist) and then create one large FAT32 formatted partition. It is important that the USB is free of other files. 3. Right click over the “MakebootableDMI_MP.exe” and select “Run as Administrator” 4. With the command shell window selected, pressEnter 5. The inserted USB key will be seen with a number assigned to it. 6. Select the number corresponding to the USB you would like to format. 7. Press Y key twice to format theUSB. 8. Type 1 to select the USB image tobuild. 9. Image will nowbuild. Please Note: It will take approximately 15-20 minutes to build the USB key (depending on the type of USB port). The New HP System Board Configuration Tool -Tool Creation Quick Start Guide - What Hardware do You Need • One USB Key (16GB-32GB) 2 What Files do YouNeed How to build HP System Board Configuration Tool from CSDP 1. Go to CSDP “Knowledge & Training ”, then click “HP Tools Library” 2. Type “ DMI TOOL” in the search bar next to “ Documents”, then click magnifying glass icon 3. The 7 required files along with USB key creation guide would be listed 1 2 DMI Tool Tips: How to create one large FAT32 formatted partition 1. Find “Create and format hard disk partition” in windows search 2. Delete all the partitions on the flash drive (if any exist) by selecting “Delete Volume” 3. Select “New Simple Volume” 4. Follow the instruction 5. Format the partition to FAT32 Tips: How to create one large FAT32 formatted partition How to update existing USB key To update your USB Key, simply download the ZIP File (SBCT Update to 2_020 (Version 004).zip)) to your desktop and follow the steps outlined below. Please note that if you are using WINZIP, “you will need to configure WINZIP first to unzip the files into the appropriate folder. 1. Insert your existing USB Key into your computer 2. Right click on the ZIP File and select “Extract All” 3. Select the root directory of the USB Key as the destination for the extraction. 4. Hit Enter and the files will extract to their appropriate folders. 5. When prompted, select to replace the existing files. 6. The USB Key is now updated and should be ready to use. Note: This update is for USB key 2.020 and will not work for any key below version 2.020.