Using the Drafting Workbench: A Comprehensive Guide, Slides of Engineering Dynamics

Download Using the Drafting Workbench: A Comprehensive Guide and more Slides Engineering Dynamics in PDF only on Docsity! TS... Using the Drafting Workbench R. Lindeke ~~ JT L” Before Entering the Drafting WB Create the Part in Handout: I used a Master Sketch For the Base 2’ary Sketch for Boss 3rd Sketch for Hole Center Points Then 3 Counter Bored Holes Docsity.com And ADD an Isometric View Click the Iso-metric ICON at the lower left – move it around your window and place it in the Upper Right Corner of the original views Docsity.com Next we define the “Reference View Plane” in our Part Model Docsity.com After Positioning Iso-View in Part Model and Select Drafting Front View Plane: “Playing” around with the arrows in the Blue Compass allows one to alter the image to be drafted – sliding the mouse between the “boxes” show one what will appear after the “fateful Click”! Docsity.com Next Create a “Offset Section View” in the Reference View Double Click at the 2nd point: Slide and position the section view to right of the ‘Right View’ Docsity.com Once Placed – we can change the Hatch Properties by Double-Clicking the Hatch itself: Docsity.com Un-needed Views can be easily deleted: Right Click on a View’s Border and click Delete! (Here for Top View) Docsity.com Now might be a good time to safe the Drafted Part: as a “Drawing” – use Save Management NOTE: A drawing is associated with the Part Model but we need both to proceed! Docsity.com Add some “Phantom Lines” For : Indicating boss size on Section View Indicating bolt hole circle on Front View Docsity.com Add Dimensions using the tools available under the Dimension ICON (expanded below) Docsity.com Change the Properties of these dimensions to “Two Parts” (Dimension Line Tab on Properties) Docsity.com Fixing the Counterbore Dimensions Start with Value tab click ‘Fake Dimension’ Enter 4.0 units as Main Value Docsity.com Adding Text use the T then on Text Properties -Insert Symbols Docsity.com