Command line for concox devices, Resúmenes de Matemáticas

¡Descarga Command line for concox devices y más Resúmenes en PDF de Matemáticas solo en Docsity! SUPPORTED SMS COMMANDS APN, teliast - Set APN SERVER, 1,eu.gpswox.com,6023,0+* - Set server address using domain name SERVER,0,109.235.68.205,6023,0% - Set server address using IP TIMER, 10,30% - Set GPS data upload inteval in seconds (minimum 10s). First value - when ACC is ON. Second value - when ACC is OFF. Maximum supported value 180005 GMT,E,0,0% - Set time zone. First value - hours, second value - minutes SOS,A,108546545584 - Set SOS numbers. Format: SOS,<A>,<Number 1>[,Number 2][, Number 3]+ CENTER,A,10854654558+ - Set center numbers. Only SOS numbers can send this command RELAY,0%* - Engine restore RELAY, 1% - Engine stop SENALM,ON, 14 - Enable Vibration Alarm. Format: SENALM,ON,alarm way+. Alarm way: 0/1/2; O means GPRS, 1 means SMS+GPRS, 2 means SMS+GPRS+CALL SENALM,OFF%* - Disable vibration alarm POWERALM,ON,1,3,304 - Enable Power Disconnect Alarm. Format: POWER,ON,alarm way,duration,recharge time+. Alarm way: 0/1/2; O means GPRS, 1 means SMS+GPRS, 2 means SMS+GPRS+CALL. Duration: 2-60s (Disconnect detecting time). Connect Duration: 1-3600s (Minimum recharge time) POWER,OFF+* - Disable Power Disconnect Alarm BATALM,ON,1%* - Enable Low Battery Alarm. Format: BATALM,ON,alarm way+f. Alarm way: 0/1/2; O means GPRS, 1 means SMS+GPRS, 2 means SMS+GPRS+CALL BATALM,OFF%* - Disable Low Battery Alarm MOVING,ON,100,1%* - Enable Towing Alarm. Format: MOVING,ON, distance,alarm way+*. Distance: 100-1000 m. Alarm way - as per previous commands on the list MOVING,OFF%* - Disable Towing Alarm SPEED,ON,10,80,1% - Enable Over-speed Alarm. Format: SPEED,ON, Duration,speed,alarm way*. Duration: 5-600s. Speed: 1-255 km/h. Alarm way - as per previous commands on the list SPEED, OFF4 - Disable Over-speed Alarm FENCE,ON,0,14.626847,120.993548,5,0UT,14* - Set Geo-Fence Alarm. Format: FENCE,ON, O,Lat,Long,radius,in/out,alarm way+. Radius: 1-9999 (100m). Alarm way - as per previous commands on the list FENCE,OFF% - Disable Geo-Fence Alarm VERSION+* - Check firmware version PARAM4A - Check parameters GPRSSETH - Check GPRS setting STATUS+ - Check GPRS/GPS status WHERE4 - Check location coordinates URLA - Check location Google link RESET+* - Restart device FACTORY - Factory reset